window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'AW-1068908279');
  • HEMI inset round washbasin Ø 385mm
    Ref. 120491

    Round washbasin for recessed installation from above or below.
    Basin internal diameter: 385mm.
    Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Bright polished finish.
    Stainless steel thickness: 0.8mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1 ¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.6kg.

  • Divider for wall-hung trough urinal
    Ref. 100900

    Divider for wall-hung trough urinals.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Install directly onto the urinal in the desired position.
    Only suitable for the new design wall-hung trough urinals ref.s 130100, 130110 and 130120.

  • SECURITHERM EP BIOSAFE pressure-balancing basin mixer
    Ref. 26216EP

    SECURITHERM basin mixer H. 95mm L. 110mm with pressure balancing.
    No spout: BIOSAFE hygienic outlet integrated into the body.
    Anti-scalding safety: HW flow rate is reduced if CW supply fails.
    Securitouch thermal insulation prevents burns.
    Ø 35mm ceramic cartridge with pressure balancing.
    Pre-set maximum temperature limiter.
    Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
    Body with smooth interior and very low water volume (reduces bacterial development).
    Flow rate limited to 4 lpm at 3 bar.
    Solid control lever.
    Mixer without pop-up waste.
    Reinforced fixing via two stainless steel rods.
    Supplied with copper tails and Ø 15mm stopcocks.
    10-year warranty.

  • DOC M lift-up shower seat
    Ref. 511423W

    DOC M lift-up shower seat for people with reduced mobility.
    White powder-coated aluminium tube structure.
    Concealed fixings.
    Large plastic slats are comfortable and easy to maintain.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    Dimensions: 650 x 320 x 168mm.
    10-year warranty.
    CE marked.
    DOC M compliant.

  • Siphon cover for FRAJU washbasin
    Ref. 100930

  • REDO wall-mounted washbasin
    Ref. 120710
    Ref. 121710

    Wall-mounted washbasin.
    Basin internal diameter: 320mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 3kg.

  • Wall-mounted PMR XS washbasin
    Ref. 120400

    Wall-mounted washbasin suitable for people with reduced mobility:shallow basin for easy wheelchair access.
    Basin internal diameter: 310mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 1/4″ waste.
    With no overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 3.9kg.

  • Be-line lift-up shower seat
    Ref. 511920W

    Be-line removable lift-up shower seat for people with reduced mobility.
    Large model.
    Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
    Retained in upright position. Slowed down descent.
    Suitable for intensive use in public places or the healthcare sector.
    Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
    Non-slip surface.
    Matte white powder-coated aluminium provides a good visual contrast with the wall.
    Solid aluminium mounting bracket.
    5 concealed fixing points.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 455 x 450 x 90mm.
    Folded dimensions: 83 x 470mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    10-year warranty. CE marked.

  • Be-line lift-up shower seat
    Ref. 511920C

    Be-line removable lift-up shower seat for people with reduced mobility.
    Large model.
    Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
    Retained in upright position. Slowed down descent.
    Suitable for intensive use in public places or the healthcare sector.
    Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
    Non-slip surface.
    Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
    Solid aluminium mounting bracket.
    5 concealed fixing points.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 455 x 450 x 90mm.
    Folded dimensions: 85 x 470mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    10-year warranty. CE marked.

  • TEMPOMATIC 4 electronic tap
    Ref. 44000015

    Deck-mounted electronic basin tap:
    230/6V recessed mains supply.
    Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Duty flush (~60 sec. every 24h after last use).
    Active, infrared presence detection, sensor at the end of the spout optimises detection.
    Chrome-plated solid brass body.
    Cap fixed in place by two concealed screws.
    PEX flexible with stopcock, filter and Ø 15mm conical inlet.
    Fixing reinforced by 2 stainless steel rods.
    Anti-blocking safety.
    10-year warranty.

  • SHA XS squat WC pan
    Ref. 113710

    Floor-recessed squat WC pan, 500 x 220 x 600mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness 1.2mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    Bowl shape suitable for male and female use.
    Non-slip foot area.
    Vertical waste outlet: Ø 100mm.
    Flushing system with one 304 stainless steel spreader.
    Weight: 5kg.
    10-year warranty.

  • SHA 700 squat WC pan
    Ref. 113610

    Floor-recessed squat WC pan, 700 x 220 x 700mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness 1.2mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    Bowl shape suitable for male and female use.
    Non-slip foot area.
    Vertical waste outlet: Ø 100mm.
    Flushing system with one 304 stainless steel spreader.
    Weight: 6kg.10-year warranty.

  • Wall-hung DELTA urinal
    Ref. 134710

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed or exposed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 7.5kg.

  • DELTA wall-hung urinal
    Ref. 134170

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 7.5kg.

  • TEMPOMATIC shower kit
    Ref. 452159

    Cross wall electronic shower kit:
    TEMPOMATIC electronic valve for mixed water supply.
    For walls ≤ 155mm.
    Power supply by electronic unit with solenoid valve 1/2″.
    230/12V transformer.
    2 operation modes:
    – Automatic activation via presence detection.
    – Voluntary ON/OFF activation by passing the hand in front of sensor ~10 cm.
    Duty flush (~60 seconds every 24 hours after the last use).
    Adjustable time flow from 30 to 60 seconds.
    Flow rate set at 6 lpm at 3 bar.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
    Chrome-plated solid brass.
    Wall plate flush to the wall.
    Threaded rods can be cut-to-size.
    10-year warranty.

  • Delabie FRAJU Wall-Mounted Washbasin

    £311.00£311.10 ex VAT

    FRAJU wall-mounted washbasin
    Ref. 120430
    Ref. 121430

    Wall-mounted washbasin, 540x480mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
    Rounded edges prevent injury.
    Without tap hole.
    Supplied with 1¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 4.65kg.

  • FINO wall-hung urinal
    Ref. 135110

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed horizontal or exposed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with a 1½” P trap. Supplied with fixing elements.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 3.5kg.

  • TEMPOMIX shower kit
    Ref. 796209

    Time flow shower kit for cross wall installation:
    TEMPOMIX 3/4″ single control mixer.
    For walls ≤ 220mm.
    Temperature control and operation via the push-button.
    Maximum temperature limiter (adjustable by the installer).
    Ligature-resistant collar.
    Soft-touch operation.
    Time flow ~30 seconds.
    Flow rate 6 lpm at 3 bar.
    Chrome-plated ROUND shower head, tamperproof with scale-resistant nozzle and automatic flow rate regulation.
    Integrated non-return valves and filters.
    Chrome-plated metal push-button.
    Threaded rods can be cut-to-size.
    10-year warranty.

  • TEMPOSTOP shower kit
    Ref. 749159

    Cross wall time flow shower kit:
    TEMPOSTOP M1/2″ time flow valve for mixed water supply.
    For walls ≤ 150mm.
    Time flow ~30 seconds.
    Flow rate 6 lpm at 3 bar.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
    Chrome-plated solid brass.
    Concealed fixings and anti-rotating nut.
    Threaded rods can be cut to size.
    10-year warranty.

  • Semi-recessed QUADRA washbasin
    Ref. 120650

    Semi-recessed washbasin, 380x380mm.
    Suitable for use with wall-mounted or extended mixer/tap.
    Basin internal diameter: 310mm.
    Cutout diameter: 310mm.
    Stainless steel thickness: 1.2mm.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 3kg.

Go to Top