Educational, Healthcare and Commercial Sanitaryware
Need Help? Call us : 01924 457600
Countertop ALGUI washbasin
Ref. 120110
Countertop washbasin, Ø 375mm.
Suitable for use with wall-mounted or extended mixer/tap.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Polished satin finish.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 3.8kg.
SECURITHERM thermostatic basin mixer
Ref. H9600610
Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
Securitouch thermal insulation prevents burns.
No non-return valve on the inlets.
Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
Spout and body with smooth interiors and low water volume.
Flow rate regulated at 7 lpm.
No manual contact thanks to Hygiene control lever L. 146mm.
Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
Reinforced fixing via 2 stainless steel rods.
10-year warranty.
Floor-standing janitorial unit
Ref. 180140
Floor-standing janitorial unit.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.0mm.
Smooth surface for easy cleaning.
Adjustable feet height up to 25mm.
With tap hole Ø 35mm on right side.
Supplied with 1 ¼” waste for washbasin and 1½” for disposal sink. Without overflow.
Hinged stainless steel bucket grid.
Weight: 22kg.
TEMPOMATIC electronic tap for sinks with BIOCLIP removable spout
Ref. 20804T215
Wall-mounted electronic tap with BIOCLIP spout, for mounting on panels < 20mm.
Independent IP65 electronic control unit (integrated 230/12V transformer).
Flow rate limited to 5 lpm at 3 bar.
Comes with 2 removable stainless steel spouts L. 188mm Ø 28mm.
Base and spout with smooth interiors (reduces niches where bacteria can develop).
Adjustable duty flush (pre-set to approx. 60 secs every 24h after last use) in order to prevent water stagnation in the network in the event of prolonged periods of non-use.
Separate sensor for mounting on panels.
Solenoid valve Ø 15mm for compression fittings with integrated filter.
Shock-resistant infrared presence detection sensor.
Chrome-plated Ø 60mm brass base.
Anti-blocking security.
Recommended installation height: 110-200mm above the basin surface.
Two shut-off options:
– standard mode: timed flow with automatic shut-off.
– ON/OFF mode: user shuts off flow voluntarily after 30 minutes.
Thermal shocks are possible.
10-year warranty.
BOB TC washbasin
Ref. 160130
Wall-mounted washbasin with through-the-wallinstallation for service ducts.
Basin internal diameter: 310mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths are available on request).
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standardEN 14688.
Weight: 5.5kg.
Wall-mounted wash trough.
1800mm wide (see spec drawing)
3 posts.
MINERALCAST: composite material consisting of natural mineralsand polyester resin.
Ideal for use in public and commercial places.
Uniform, non-porous surface is easy to clean.
One-piece cast washbasin, seam-free, for easy maintenanceand better hygiene.
Pleasant to the touch.
With no tap hole.
Supplied with 1½” waste. Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 90kg.
MINERALCAST pedestals in anthracite also available, sold individually
FACIL wall-mounted washbasin
Ref. 120800 /121800
Wall-mounted washbasin, 360x390mm.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4.1kg.
Wall-mounted eye wash station
Ref. 9102
Wall-mounted eye wash station with manual control includes:
304 stainless steel basin Ø 250mm, green powder-coated finish.
Two spray heads fitted with protective caps in shock-resistant green ABS; will eject automatically when activated.
1/4-turn, nickel-plated brass valve opens and closes quickly.
Water flow is activated by the hand control. The eye wash will continue to operate when the hand control is released. The water flow will stop when the hand control is pulled towards the user.
Flow rate 20 lpm at 3 bar.
Aerators with stainless steel double filters.
Water supply M1/2″.
Pipework made from galvanised steel, grey powder-coated finish.
Hand control made from galvanised steel, green powder-coated finish.
Wall-mounted on a brass plate (screws not included.)
Supplied with identification sign for first aid equipment: “Eye Wash”.
10-year warranty.
S21 S TC wall-hung WC pan
Ref. 160310
Wall-hung WC pan with through-the-wall installation for service ducts.
Elegant and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm
One-piece pressed WC bowl, seam-free for easy maintenanceand better hygiene.
WC bowl surface is polished with rounded edges for easy cleaning.
Concealed perimetral flushing rim.
Horizontal water inlet: Ø 55mm
Horizontal waste outlet: Ø 100mm
Water saving: works with 4L or more of water.
200mm threaded rod can be cut to size (other lengths are available on request).
Shrouded WC pan.
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 11kg.
Wall-hung S21 S WC pan
Ref. 110310
Wall-hung WC pan, 360 x 350 x 535mm.
Compatible with all standard frame systems available on the market.
Elegant and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm.
One-piece pressed WC bowl, seam-free for easy maintenanceand better hygiene.
WC bowl surface is polished with rounded edges for easy cleaning.Concealed perimetral flushing rim.
Horizontal water inlet: Ø 55mm.
Horizontal waste outlet: Ø 100mm.
Water saving: works with 4L or more of water.
Shrouded pan.
Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with fixing plate and 6 theft prevention TORX security screws.
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 11kg.
10-year warranty.
FRAJU PMR washbasin
Ref. 120440
Wall-mounted washbasin, 620x505mm.
Suitable model for people with reduced mobility.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
Rounded edges prevent injury.
Without tap hole.
Supplied with 1¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5kg.
TEMPOMATIC multi-urinals urinal valve
Ref. 487620
TEMPOMATIC electronic valve with infrared barrier for urinals:
Rinsing for 1 – 8 urinals (standard or stall) or 2 siphon action urinals.
For recessed installation.
Electronic unit with 230/12V transformer.
Hydraulic unit with solenoid valve, stopcock M3/4″ and filter.
Hygienic duty flush every 12hr after last use, prevents vacuums in the siphon.
Presence detection by infrared barrier.
Recessed Infrared detector Ø 50mm and reflector Ø 85mm.
Automatic pre-rinse possible after the arrival of the first user.
Automatic rinse every 30 or 60 sec.
Time flow pre-set at 3 sec., can be adjusted from 2 to 14 sec.
Flow rate 0.3 l/sec. at 3 bar pressure, can be adjusted.
Maximum detection range recommended: 6 meters.
Anti-blocking safety: automatic shut-off after 20 uninterrupted cycles.
10-year warranty.
MINERALCAST wash trough
1400mm wide (see Spec Drawing)
Ref. 453140
Wall-mounted wash trough, 3 services.
MINERALCAST: composite material consisting of natural minerals and polyester resin.
Ideal for use in public and commercial places, especially schools.
Uniform, non-porous surface is easy to clean.
One-piece cast wash trough, seam-free, for easy maintenance and better hygiene.
Warm to the touch.
With incline to prevent water pooling.
With central tap hole Ø 35mm.
Supplied with three 1¼” wastes. Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 63kg.
TEMPOMATIC 4 electronic tap
Ref. 443426
Electronic basin tap for panels:
Battery-operated with integrated 123 6V Lithium batteries.
Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated metal body L. 125mm.
Cap fixed in place by 2 concealed screws.
Installation for panels from 1 – 24mm.
Anti-blocking security.
10-year warranty.
TRIPLO RP wall-mounted multiple washbasin
Ref. 120750
Wall-mounted triple washbasin, 1,800x500mm.
With an upstand to protect the wall from splashing and improve hygiene.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel.
Polished satin stainless steel.
Stainless steel thickness: 1.5mm
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼” waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 22kg.
700 P floor-standing WC pan
Ref. 110700
Floor-standing WC pan, 360 x 480 x 700mm.
700mm elongated pan for better comfort for people with reduced mobility.
Elegant and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm.
One-piece pressed WC bowl, seam-free for easy maintenanceand better hygiene.
WC bowl surface is polished with rounded edges for easy cleaning.
Concealed perimetral flushing rim.
Horizontal water inlet: Ø 55mm.
Horizontal waste outlet: Ø 100mm. Supplied with PVC pipe.
Water saving: works with 4L or more of water.
Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
Quick and easy to install: 2 access panels with theft prevention TORX security screws.
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 15kg.
10-year warranty.
MONOBLOCO S21 WC pan with cistern
Ref. 110390
Floor-standing WC pan with dual flush cistern 3L/6L, 370 x 815 x 620mm.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.5mm.
One-piece pressed WC bowl, seam-free for better hygiene.
WC bowl surface is polished with rounded edges for easy cleaning.
Concealed perimetral flushing rim. Water supply can be recessed from below or exposed from the side (right/left).
Recessed horizontal or vertical waste outlet. Supplied with PVC pipe.
Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
Quick to install: 2 access panels with theft prevention TORX security screws.
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 21kg.
10-year warranty.
Wall-mounted TRAPEZ washbasin
Ref. 120270
Ref. 121270
Wall-mounted washbasin, 600x505mm.
Shallow washbasin suitable for people with reduced mobility.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5.5kg.
S21 P TC floor-standing WC pan
Ref. 160550
Floor-standing WC pan with through-the-wall installation for service ducts.
Elegant and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm
One-piece, pressed WC bowl, seam-free for easy maintenanceand better hygiene.
WC bowl surface is polished with rounded edges for easy cleaning.
Concealed perimetral flushing rim.
Horizontal water inlet: Ø 55mm
Horizontal waste outlet: Ø 100mm
Water saving: works with 4L or more of water.
200mm threaded rod can be cut to size (other lengths available on request).
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 13.5kg.
S21 P floor-standing WC pan
Ref. 110300
Floor-standing WC pan, 360 x 400 x 580mm.
Elegant and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm.
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
WC bowl surface is polished with rounded edges for easy cleaning.Concealed perimetral flushing rim.
Horizontal water inlet: Ø 55mm.
Horizontal waste outlet: Ø 100mm. Supplied with PVC pipe.
Water saving: works with 4L or more of water.
Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
Quick and easy to install: 2 access panels with theft prevention TORXsecurity screws.
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 14kg.
10-year warranty.
COMPANY INFORMATION
01924 457600
Mon-Thursday 8.30am – 5pm
Friday: 8.30am – 3pm
OUR POLICIES
SECURE PAYMENTS BY
Registered in England: 06851971 | VAT no. 380618882 | © Plumbware.co.uk Ltd 2009 - 2024