13mm Fascia Brackets Pack of 3
-
Floor to ceiling column with feet
Please note No wall brackets supplied. Please add 13mm or 18mm wall brackets if required for panels to attached to post.
-
Mineral Collection
From subtle shimmers to flickering quartz; this versatile collection complements both modern and traditional spaces.These stylish designs blend confidence with refinement to ensure that you have the right decor for your feature. All decors from the Mineral Collection are manufactured from a moisture resistant MDF core and finished with a high pressure laminate (HPL).
-
FINO WF water-free urinal
Ref. 135010Wall-hung individual water-free urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Recessed horizontal waste outlet.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
1½” waste outlet.
Supplied with a silicone membrane to prevent bad smells.
Supplied with fixing elements.
Weight: 3.5kg. -
Surgical scrub-up trough with low upstand
Ref. 187020Wall-mounted surgical scrub-up trough with 75mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 2,100mm, 3 services. Without tap hole.
Smooth surface and rounded inside edges for easy cleaning.
“Hygiene+”: reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. Supplied with fixing elements.
Weight: 37.6kg. -
LP trough urinal
Ref. 130320Floor-standing trough urinal.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rear water inlet.
Central drainage.
Supplied with 3 stainless steel rinsers and 3 flexible hoses.
Water saving: optimal rinsing with 0.1 L/sec. per service i.e. 0.3L per use.
Waste outlet 1½”. Supplied with waste and integrated trap (ref. 785000).
Easy to install and maintain thanks to access panels with theft prevention TORX security screws.
Weight: 33.5kg.
Length: 1800mm -
CANAL wall-mounted wash trough
Ref. 120240Wall-mounted wash trough for 1 post.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
Drainage on the right.
With no tap hole.
Supplied with 1 ½” waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 6kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800001). -
SECURITHERM shower panel
Ref. H963615SECURITHERM anodised aluminium shower panel for wall-mounted exposed installation:
SECURITHERM sequential thermostatic mixer (non-time flow).
Temperature control from cold water up to 39°C.
Temperature limiter set at 39°C, can be adjusted.
Anti-scalding failsafe: automatic shut-off if cold or hot water supply fails.
Thermal shocks are possible.
Flow rate 9 lpm at 3 bar.
Sliding handset on chrome-plated rail with flexible shower hose removable with push fit rapid STOP connector.
Hygiene control lever L. 100mm.
Top inlets with M1/2″ inline stopcocks.
Concealed fixings and filters.
10-year warranty. -
Eye wash and safety shower combination
Ref. 9203Free-standing eye wash and safety shower combination with manual or foot control includes:
Frost-free system as standard.
304 stainless steel basin Ø 250mm with green finish.
Eye wash spray heads fitted with protective caps in shock-resistant green ABS; will eject automatically when activated.
Flow rate 20 lpm at 3 bar, aerators have stainless steel double filters.
Circular shower head Ø 250mm in green, shock-resistant ABS.
Flow rate 70 lpm at 1 bar dynamic pressure (120 lpm at 3 bar dynamic pressure).
Water supply F1″.
Pipework made from galvanised steel, grey powder-coated finish. Triangular pull handle in green powder-coated brass. Hand and foot controls in green powder-coated galvanised steel.
Fixed to the floor by a brass base plate (screws not included).
Supplied with identification signs for first aid equipment: “Safety Shower” and “Eye Wash”.Operation:
1/4-turn, nickel plated brass valves open and close quickly.
Simultaneous Eye Wash and Shower:
Water flows simply by pulling on the triangular handle.
The flow will continue even when the handle is released.
The flow will stop when the handle is returned to its original position.
Eye Wash only:
Water flow is operated by the foot pedal or the hand control. The eye wash will continue to flow when the pedal or hand control is released.
The water flow will stop when the hand control is pulled towards the user or the foot pedal is raised.
10-year warranty.
The water does not shut off automatically, allowing the injured person to have both hands free (to remove their clothing, keep their eyes open, etc.). -
KOMPACT washbasin and floor-standing WC combination
Ref. 160800Combination unit: washbasin and floor-standing central WC panwith recessed toilet roll holder.
Wall-mounted installation with 3 access panels, 2 on the sidesand 1 on the top with theft prevention TORX security screws.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel unit thickness: 2mm.
Rounded corners and edges for improved safety.
Smooth surface for easy cleaning.
Suitable for prisons, police stations, etc.
WC pan is completely welded to washbasin, no screws:
makes cleaning easier and prevents concealment of objects.
WC pan central to the unit.
Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2″.
WC equipped with time flow flush valve, 7 second time flow, M3/4″.
Water inlet: washbasin M1/2″, WC M3/4″.
Recessed horizontal water outlet: Ø 100mm.
Supplied with washbasin siphon.
Easy to install: only one water outlet for both washbasin and WC,water inlet and outlet already connected.
Weight: 36kg. -
Wall-mounted BOB washbasin
Ref. 120130
Ref. 121130Wall-mounted washbasin.
Basin internal diameter: 310mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin, concealed trap.
Quick and easy to install from the front thanksto a stainless steel mounting frame.
Supplied with 1 ¼” waste and trap.
With tap hole Ø 35mm on right side.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5.5kg. -
TEMPOMATIC Electronic tap
Ref. 44115715Cross wall electronic basin tap:
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 sec. every 24h after last use).
Shockproof infrared presence detection sensor for wall ≤ 165mm.
Anti-blocking safety.
Solenoid valve with filter and Ø 15mm conical inlet.
Chrome-plated fixed spout L. 170mm for wall ≤ 165mm with anti-rotating pin.
Threaded rods can be cut to size.
10-year warranty.TEMPOMATIC Electronic tap
Ref. 44115715Cross wall electronic basin tap:
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 sec. every 24h after last use).
Shockproof infrared presence detection sensor for wall ≤ 165mm.
Anti-blocking safety.
Solenoid valve with filter and Ø 15mm conical inlet.
Chrome-plated fixed spout L. 170mm for wall ≤ 165mm with anti-rotating pin.
Threaded rods can be cut to size.
10-year warranty. -
Wall-mounted eye wash station
Ref. 9102Wall-mounted eye wash station with manual control includes:
304 stainless steel basin Ø 250mm, green powder-coated finish.
Two spray heads fitted with protective caps in shock-resistant green ABS; will eject automatically when activated.
1/4-turn, nickel-plated brass valve opens and closes quickly.
Water flow is activated by the hand control. The eye wash will continue to operate when the hand control is released. The water flow will stop when the hand control is pulled towards the user.
Flow rate 20 lpm at 3 bar.
Aerators with stainless steel double filters.
Water supply M1/2″.
Pipework made from galvanised steel, grey powder-coated finish.
Hand control made from galvanised steel, green powder-coated finish.
Wall-mounted on a brass plate (screws not included.)
Supplied with identification sign for first aid equipment: “Eye Wash”.
10-year warranty. -
SECURITHERM thermostatic basin mixer
Ref. H9600610Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
Securitouch thermal insulation prevents burns.
No non-return valve on the inlets.
Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
Spout and body with smooth interiors and low water volume.
Flow rate regulated at 7 lpm.
No manual contact thanks to Hygiene control lever L. 146mm.
Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
Reinforced fixing via 2 stainless steel rods.
10-year warranty. -
HEMI inset round washbasin Ø 310mm
Ref. 120471Round basin for recessed installation from above or below.
Basin internal diameter: 310mm.
Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
Bacteriostatic 304 stainless steel.
Bright polished finish.
Stainless steel thickness: 0.8mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1 ¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 1.5kg. -
DESCRIPTION
Floor-standing ILHA drinking fountain
Ref. 180100Floor-standing drinking fountain.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 0.8mm.
Height: 915mm.
Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8″.
Flat perforated waste, without screws:easy to clean and vandal-resistant.
Recessed vertical water outlet. Waste outlet 1¼”.
Supplied with fixing elements.
Weight: 9.6kg. -
Floor-standing disposal sink
Ref. 180150Floor-standing disposal sink.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.0mm.
One-piece pressed bowl, seam-free.
Smooth surface is easy to clean.
Adjustable feet height up to 40mm.
Supplied with 1½” waste. Without overflow.
Hinged stainless steel bucket grid.
Weight: 10.6kg. -
HEMI inset round washbasin Ø 385mm
Ref. 120490Round washbasin for recessed installation from above or below.
Basin internal diameter: 385mm.
Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 0.8mm
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1 ¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 1.6kg. -
Wall-mounted 304 stainless steel bin, 38 litres
Ref. 510463SWall-mounted, rectangular bin for paper towels and paper towels.
Robust model.
1mm thick.
Bacteriostatic 304 stainless steel.
Capacity 38 litres.
Polished satin 304 stainless steel.
Stainless steel thickness: 1mm.
Dimensions: 160 x 400 x 590mm.
10-year warranty. -
Wall-mounted toilet brush set with lid
Ref. 4051EWWall-mounted toilet brush set with lid.
Bacteriostatic 304 stainless steel. White powder-coated finish.
Wall-mounted model with anti-theft lock for fixing.
Robust model.
Easy to clean: plastic bowl can be removed from above.
Plastic bowl with reservoir: avoids toilet brush sitting in residual water and reduces the risk of splashing when next used.
Toilet brush automatically centres itself in the holder.
Stainless steel body 1mm thick.
Dimensions: Ø 90 x 410mm.
10-year warranty. -
Rectangular stainless steel mirror, H. 1000mm
Ref. 3459Rectangular mirror made from “mirror” polished bacteriostatic 304 stainless steel.
For combined installation: height enables use from standing or sitting positions, or from a wheelchair.
Reinforced by a concealed, solid, 10mm thick PVC plate.
5 fixing points. Concealed fixings.
Unbreakable.
Dimensions: 10 x 595 x 980mm.
10-year warranty. -
Wall-mounted electronic liquid soap dispenser, 1 litre
Ref. 512066PElectronic liquid soap dispenser, wall-mounted.
Vandal-resistant model with lock and standard DELABIE key.
No manual contact: hands are automatically detected by infrared cell (detection distancecan be adjusted).
Bacteriostatic 304 stainless steel cover.
One-piece hinged cover for easy maintenanceand better hygiene.
No waste pump dispenser: dispenses 0.8ml(can be adjusted up to 7 doses per activation).
Option of operation in anti-clogging mode.
Power supply: 6 AA -1.5V (DC9V) batteries supplied integrated in the soap dispenser body.
Low battery indicator light.
Tank with large opening: eases transfer of soapfrom large containers.
Window allows soap level to be checked.
Bright polished 304 stainless steel.
Stainless steel thickness: 1mm.
Capacity: 1 litre.
Dimensions : 90 x 105 x 256mm.
For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
Compatible with hydroalcoholic gel.
CE marked.
10-year warranty.
