Educational, Healthcare and Commercial Sanitaryware
Need Help? Call us : 01924 457600
Wall-mounted paper towel dispenser, for 500 sheets
Ref. 510601P
Wall-mounted paper towel dispenser.
Dispenses one sheet at a time, suitable for most paper towels.
With lock and standard DELABIE key.
Level control.
Capacity: 500 sheets.
Bright polished 304 bacteriostatic stainless steel.
Dimensions: 120 x 275 x 360mm.
Pack of 180 interfolded paper towels can be ordered separately (ref. 6606).
Paper towel dimensions: open 230 x 250mm, folded 115 x 250mm.
10-year warranty.
Anti-bacterial BIOFIL shower head filter
Ref. 20060.10P
Single use removable BIOFIL anti-bacterial shower head filter, with sterilising grade of 0.1μm absolute-rated.
Hydrophilic polyethylene hollow fibres.
Filtration area: 1,400cm².
Filtration flow rate: 12 lpm at 3 bar (filter only, excludes any flow rate restrictor/regulator in the shower).
Maximum upstream pressure at point-of-use: 5 bar.
Length of maximum use: 62 days after installation.
Compatible with and resistant to chemical and thermal shocks.
CE class 1 sterile anti-bacterial filters.
Weight: 120g.
Supplied in boxes of 10, individually wrapped, sterile.
TEMPOMATIC 4 electronic tap
Ref. 443406
Wall-mounted electronic basin tap:
Battery-operated with integrated 123 6V Lithium batteries.
Reduced-stagnation solenoid valve and electronic unit integrated into the body of the tap.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after last use).
Active infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated metal body L. 130mm.
Cap fixed in place by 2 concealed screws.
Wall-mounted.
Anti-blocking security.
Suitable for people with reduced mobility.
10-year warranty.
HEMI inset round washbasin Ø 310mm
Ref. 120470
Round basin for recessed installation from above or below.
Basin internal diameter: 310mm.
Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 0.8mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 1.5kg.
HEMI inset round washbasin Ø 385mm
Ref. 120491
Round washbasin for recessed installation from above or below.
Basin internal diameter: 385mm.
Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
Bacteriostatic 304 stainless steel.
Bright polished finish.
Stainless steel thickness: 0.8mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1 ¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 1.6kg.
Divider for wall-hung trough urinal
Ref. 100900
Divider for wall-hung trough urinals.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Install directly onto the urinal in the desired position.
Only suitable for the new design wall-hung trough urinals ref.s 130100, 130110 and 130120.
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
SECURITHERM basin mixer H. 95mm L. 110mm with pressure balancing.
No spout: BIOSAFE hygienic outlet integrated into the body.
Anti-scalding safety: HW flow rate is reduced if CW supply fails.
Securitouch thermal insulation prevents burns.
Ø 35mm ceramic cartridge with pressure balancing.
Pre-set maximum temperature limiter.
Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
Body with smooth interior and very low water volume (reduces bacterial development).
Flow rate limited to 4 lpm at 3 bar.
Solid control lever.
Mixer without pop-up waste.
Reinforced fixing via two stainless steel rods.
Supplied with copper tails and Ø 15mm stopcocks.
10-year warranty.
REDO wall-mounted washbasin
Ref. 120710
Ref. 121710
Wall-mounted washbasin.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.
Wall-mounted PMR XS washbasin
Ref. 120400
Wall-mounted washbasin suitable for people with reduced mobility:shallow basin for easy wheelchair access.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 1/4″ waste.
With no overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3.9kg.
Be-line lift-up shower seat
Ref. 511920W
Be-line removable lift-up shower seat for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
Non-slip surface.
Matte white powder-coated aluminium provides a good visual contrast with the wall.
Solid aluminium mounting bracket.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 455 x 450 x 90mm.
Folded dimensions: 83 x 470mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
10-year warranty. CE marked.
Be-line lift-up shower seat
Ref. 511920C
Be-line removable lift-up shower seat for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
Non-slip surface.
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
Solid aluminium mounting bracket.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 455 x 450 x 90mm.
Folded dimensions: 85 x 470mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
10-year warranty. CE marked.
SHA XS squat WC pan
Ref. 113710
Floor-recessed squat WC pan, 500 x 220 x 600mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness 1.2mm.
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
Bowl shape suitable for male and female use.
Non-slip foot area.
Vertical waste outlet: Ø 100mm.
Flushing system with one 304 stainless steel spreader.
Weight: 5kg.
10-year warranty.
SHA 700 squat WC pan
Ref. 113610
Floor-recessed squat WC pan, 700 x 220 x 700mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness 1.2mm.
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
Bowl shape suitable for male and female use.
Non-slip foot area.
Vertical waste outlet: Ø 100mm.
Flushing system with one 304 stainless steel spreader.
Weight: 6kg.10-year warranty.
Wall-hung DELTA urinal
Ref. 134710
Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Top (exposed) water inlet.
Recessed or exposed waste outlet. Concealed trap.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
CE marked. Complies with European standard EN 13407 for 2L flush.
Weight: 7.5kg.
DELTA wall-hung urinal
Ref. 134170
Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Top (exposed) water inlet.
Recessed waste outlet. Concealed trap.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
CE marked. Complies with European standard EN 13407 for 2L flush.
Weight: 7.5kg.
TEMPOMATIC shower kit
Ref. 452159
Cross wall electronic shower kit:
TEMPOMATIC electronic valve for mixed water supply.
For walls ≤ 155mm.
Power supply by electronic unit with solenoid valve 1/2″.
230/12V transformer.
2 operation modes:
– Automatic activation via presence detection.
– Voluntary ON/OFF activation by passing the hand in front of sensor ~10 cm.
Duty flush (~60 seconds every 24 hours after the last use).
Adjustable time flow from 30 to 60 seconds.
Flow rate set at 6 lpm at 3 bar.
Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
Chrome-plated solid brass.
Wall plate flush to the wall.
Threaded rods can be cut-to-size.
10-year warranty.
FRAJU wall-mounted washbasin
Ref. 120430
Ref. 121430
Wall-mounted washbasin, 540x480mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
Rounded edges prevent injury.
Without tap hole.
Supplied with 1¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4.65kg.
FINO wall-hung urinal
Ref. 135110
Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Top (exposed) water inlet.
Recessed horizontal or exposed waste outlet. Concealed trap.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with a 1½” P trap. Supplied with fixing elements.
CE marked. Complies with European standard EN 13407 for 2L flush.
Weight: 3.5kg.
TEMPOMIX shower kit
Ref. 796209
Time flow shower kit for cross wall installation:
TEMPOMIX 3/4″ single control mixer.
For walls ≤ 220mm.
Temperature control and operation via the push-button.
Maximum temperature limiter (adjustable by the installer).
Ligature-resistant collar.
Soft-touch operation.
Time flow ~30 seconds.
Flow rate 6 lpm at 3 bar.
Chrome-plated ROUND shower head, tamperproof with scale-resistant nozzle and automatic flow rate regulation.
Integrated non-return valves and filters.
Chrome-plated metal push-button.
Threaded rods can be cut-to-size.
10-year warranty.
COMPANY INFORMATION
01924 457600
Mon-Thursday 8.30am – 5pm
Friday: 8.30am – 3pm
OUR POLICIES
SECURE PAYMENTS BY
Registered in England: 06851971 | VAT no. 380618882 | © Plumbware.co.uk Ltd 2009 - 2025
