window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'AW-1068908279');
  • HEMI inset round washbasin Ø 385mm
    Ref. 120490

    Round washbasin for recessed installation from above or below.
    Basin internal diameter: 385mm.
    Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 0.8mm
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1 ¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.6kg.

  • PREMIX NANO thermostatic mixing valve
    Ref. 732116

    Hot water thermostatic mixing valve for mixed water distribution from 34 – 60°C:
    For 1 – 2 taps or 1 shower.
    Anti-scalding safety: immediate shut-off if cold or hot water fails.
    Temperature pre-set at 38°C, can be adjusted by the installer from 34 – 60°C.
    Brass body.
    Filters and non-return valves.
    Minimum flow rate to operate: 3 lpm.
    Thermal shocks are possible.
    Chrome-plated brass body M1/2” inlets and Ø 15mm conical outlets.
    10-year warranty.

  • SECURITHERM EP BIOSAFE pressure-balancing basin mixer
    Ref. 26216EP

    SECURITHERM basin mixer H. 95mm L. 110mm with pressure balancing.
    No spout: BIOSAFE hygienic outlet integrated into the body.
    Anti-scalding safety: HW flow rate is reduced if CW supply fails.
    Securitouch thermal insulation prevents burns.
    Ø 35mm ceramic cartridge with pressure balancing.
    Pre-set maximum temperature limiter.
    Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
    Body with smooth interior and very low water volume (reduces bacterial development).
    Flow rate limited to 4 lpm at 3 bar.
    Solid control lever.
    Mixer without pop-up waste.
    Reinforced fixing via two stainless steel rods.
    Supplied with copper tails and Ø 15mm stopcocks.
    10-year warranty.

  • DOC M lift-up shower seat
    Ref. 511423W

    DOC M lift-up shower seat for people with reduced mobility.
    White powder-coated aluminium tube structure.
    Concealed fixings.
    Large plastic slats are comfortable and easy to maintain.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    Dimensions: 650 x 320 x 168mm.
    10-year warranty.
    CE marked.
    DOC M compliant.

  • Siphon cover for FRAJU washbasin
    Ref. 100930

  • REDO wall-mounted washbasin
    Ref. 120710
    Ref. 121710

    Wall-mounted washbasin.
    Basin internal diameter: 320mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 3kg.

  • Wall-mounted PMR XS washbasin
    Ref. 120400

    Wall-mounted washbasin suitable for people with reduced mobility:shallow basin for easy wheelchair access.
    Basin internal diameter: 310mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 1/4″ waste.
    With no overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 3.9kg.

  • Be-line lift-up shower seat
    Ref. 511920W

    Be-line removable lift-up shower seat for people with reduced mobility.
    Large model.
    Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
    Retained in upright position. Slowed down descent.
    Suitable for intensive use in public places or the healthcare sector.
    Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
    Non-slip surface.
    Matte white powder-coated aluminium provides a good visual contrast with the wall.
    Solid aluminium mounting bracket.
    5 concealed fixing points.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 455 x 450 x 90mm.
    Folded dimensions: 83 x 470mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    10-year warranty. CE marked.

  • Be-line lift-up shower seat
    Ref. 511920C

    Be-line removable lift-up shower seat for people with reduced mobility.
    Large model.
    Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
    Retained in upright position. Slowed down descent.
    Suitable for intensive use in public places or the healthcare sector.
    Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
    Non-slip surface.
    Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
    Solid aluminium mounting bracket.
    5 concealed fixing points.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 455 x 450 x 90mm.
    Folded dimensions: 85 x 470mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    10-year warranty. CE marked.

  • TEMPOMATIC 4 electronic tap
    Ref. 44000015

    Deck-mounted electronic basin tap:
    230/6V recessed mains supply.
    Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Duty flush (~60 sec. every 24h after last use).
    Active, infrared presence detection, sensor at the end of the spout optimises detection.
    Chrome-plated solid brass body.
    Cap fixed in place by two concealed screws.
    PEX flexible with stopcock, filter and Ø 15mm conical inlet.
    Fixing reinforced by 2 stainless steel rods.
    Anti-blocking safety.
    10-year warranty.

  • SHA XS squat WC pan
    Ref. 113710

    Floor-recessed squat WC pan, 500 x 220 x 600mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness 1.2mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    Bowl shape suitable for male and female use.
    Non-slip foot area.
    Vertical waste outlet: Ø 100mm.
    Flushing system with one 304 stainless steel spreader.
    Weight: 5kg.
    10-year warranty.

  • SHA 700 squat WC pan
    Ref. 113610

    Floor-recessed squat WC pan, 700 x 220 x 700mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness 1.2mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    Bowl shape suitable for male and female use.
    Non-slip foot area.
    Vertical waste outlet: Ø 100mm.
    Flushing system with one 304 stainless steel spreader.
    Weight: 6kg.10-year warranty.

  • PREMIX NANO thermostatic mixing valve
    Ref. 732115

    Hot water thermostatic mixing valve for mixed water distribution from 34 – 60°C:
    For 1 – 2 taps or 1 shower.
    Anti-scalding safety: immediate shut-off if cold or hot water fails.
    Temperature pre-set at 38°C, can be adjusted by the installer from 34 – 60°C.
    Brass body.
    Filters and non-return valves.
    Minimum flow rate to operate: 3 lpm.
    Thermal shocks are possible.
    Nickel-plated brass body M1/2” inlets and Ø 15mm conical outlets.
    10-year warranty.

  • SPORTING shower kit
    Ref. 714000

    Time flow shower kit for exposed installation:
    SPORTING time flow valve M1/2″ for top inlet supply with mixed water.
    For wall-mounted, exposed installation.
    Reinforced shower column Ø 16mm and collar.
    Soft-touch operation.
    Time flow ~30 seconds.
    Flow rate 6 lpm at 3 bar.
    Tamperproof, scale-resistant fixed showerhead with automatic flow rate regulation.
    De-pressurising push-button.
    Fixings with stainless steel screws supplied.
    Chrome-plated solid brass body.
    Integrated non-return valve and filter.
    10-year warranty.

  • Wall-hung DELTA urinal
    Ref. 134710

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed or exposed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 7.5kg.

  • DELTA wall-hung urinal
    Ref. 134170

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 7.5kg.

  • TEMPOMATIC shower kit
    Ref. 452159

    Cross wall electronic shower kit:
    TEMPOMATIC electronic valve for mixed water supply.
    For walls ≤ 155mm.
    Power supply by electronic unit with solenoid valve 1/2″.
    230/12V transformer.
    2 operation modes:
    – Automatic activation via presence detection.
    – Voluntary ON/OFF activation by passing the hand in front of sensor ~10 cm.
    Duty flush (~60 seconds every 24 hours after the last use).
    Adjustable time flow from 30 to 60 seconds.
    Flow rate set at 6 lpm at 3 bar.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
    Chrome-plated solid brass.
    Wall plate flush to the wall.
    Threaded rods can be cut-to-size.
    10-year warranty.

  • Delabie FRAJU Wall-Mounted Washbasin

    £311.00£311.10 ex VAT

    FRAJU wall-mounted washbasin
    Ref. 120430
    Ref. 121430

    Wall-mounted washbasin, 540x480mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
    Rounded edges prevent injury.
    Without tap hole.
    Supplied with 1¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 4.65kg.

  • FINO wall-hung urinal
    Ref. 135110

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed horizontal or exposed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with a 1½” P trap. Supplied with fixing elements.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 3.5kg.

  • FINO wall-mounted urinal
    Ref. 135710

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rear water inlet (recessed).
    Recessed or exposed horizontal waste outlet. Concealed trap.
    Quick and easy to install to from the front thanks to a stainless steel mounting frame.
    Supplied with a 11/2″ P trap. Supplied with fixing elements.
    CE marked. Complies with European standard EN 13407 for a 2 litre flush.
    Weight: 3.5kg.

  • TEMPOMIX shower kit
    Ref. 796209

    Time flow shower kit for cross wall installation:
    TEMPOMIX 3/4″ single control mixer.
    For walls ≤ 220mm.
    Temperature control and operation via the push-button.
    Maximum temperature limiter (adjustable by the installer).
    Ligature-resistant collar.
    Soft-touch operation.
    Time flow ~30 seconds.
    Flow rate 6 lpm at 3 bar.
    Chrome-plated ROUND shower head, tamperproof with scale-resistant nozzle and automatic flow rate regulation.
    Integrated non-return valves and filters.
    Chrome-plated metal push-button.
    Threaded rods can be cut-to-size.
    10-year warranty.

  • TEMPOSTOP shower kit
    Ref. 749159

    Cross wall time flow shower kit:
    TEMPOSTOP M1/2″ time flow valve for mixed water supply.
    For walls ≤ 150mm.
    Time flow ~30 seconds.
    Flow rate 6 lpm at 3 bar.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
    Chrome-plated solid brass.
    Concealed fixings and anti-rotating nut.
    Threaded rods can be cut to size.
    10-year warranty.

  • Floor-standing disposal sink
    Ref. 180150

    Floor-standing disposal sink.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.0mm.
    One-piece pressed bowl, seam-free.
    Smooth surface is easy to clean.
    Adjustable feet height up to 40mm.
    Supplied with 1½” waste. Without overflow.
    Hinged stainless steel bucket grid.
    Weight: 10.6kg.

  • Semi-recessed QUADRA washbasin
    Ref. 120650

    Semi-recessed washbasin, 380x380mm.
    Suitable for use with wall-mounted or extended mixer/tap.
    Basin internal diameter: 310mm.
    Cutout diameter: 310mm.
    Stainless steel thickness: 1.2mm.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 3kg.

  • DESCRIPTION

    Floor-standing ILHA drinking fountain
    Ref. 180100

    Floor-standing drinking fountain.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 0.8mm.
    Height: 915mm.
    Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8″.
    Flat perforated waste, without screws:easy to clean and vandal-resistant.
    Recessed vertical water outlet. Waste outlet 1¼”.
    Supplied with fixing elements.
    Weight: 9.6kg.

  • AQUEDUTO wall-mounted washbasin
    Ref. 120150

    Wall-mounted washbasin, 700x440mm.
    Simple and timeless design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    .Stainless steel thickness: 1.5mm
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with brackets and fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 12kg.

  • BAILA floor-standing washbasin
    Ref. 120170

    Floor-standing washbasin, height 830mm. Basin internal diameter: 310mm.
    Design-led styling.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 0.8mm.
    Rounded edges prevent injury.
    No tap hole.
    Supplied with 1 ¼” waste. Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 12kg.

  • TEMPOMIX time flow mixer
    Ref. 79500015

    Deck-mounted single control time flow basin mixer:
    Soft-touch operation.
    Temperature control and operation via the push-button.
    Time flow ~7 seconds.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
    Scale-resistant flow straightener.
    Chrome-plated solid brass body.
    Ergonomic chrome-plated metal push-button.
    PEX flexibles Ø 15mm for compression fittings with stopcocks, filters and non-return valves.
    Fixing reinforced by 2 stainless steel rods.
    Adjustable maximum temperature limiter.
    10-year warranty.

  • Wall-mounted SD drinking fountain
    Ref. 180800

    Wall-mounted drinking fountain.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8″.
    Flat perforated waste, without screws:easy to clean and vandal-resistant.
    Recessed horizontal water outlet.
    Waste outlet 1¼” trap.
    Supplied with fixing elements.Weight: 2.4kg.

  • HEMI inset round washbasin Ø 310mm
    Ref. 120471

    Round basin for recessed installation from above or below.
    Basin internal diameter: 310mm.
    Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Bright polished finish.
    Stainless steel thickness: 0.8mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1 ¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.5kg.

  • Countertop ALGUI washbasin
    Ref. 120110

    Countertop washbasin, Ø 375mm.
    Suitable for use with wall-mounted or extended mixer/tap.
    Basin internal diameter: 310mm.
    Bacteriostatic 304 stainless steel.
    Stainless steel thickness: 1.2mm.
    Polished satin finish.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 3.8kg.

  • SECURITHERM thermostatic basin mixer
    Ref. H9600610

    Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
    Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
    Securitouch thermal insulation prevents burns.
    No non-return valve on the inlets.
    Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
    Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
    Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
    Spout and body with smooth interiors and low water volume.
    Flow rate regulated at 7 lpm.
    No manual contact thanks to Hygiene control lever L. 146mm.
    Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
    Reinforced fixing via 2 stainless steel rods.
    10-year warranty.

  • Floor-standing janitorial unit
    Ref. 180140

    Floor-standing janitorial unit.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.0mm.
    Smooth surface for easy cleaning.
    Adjustable feet height up to 25mm.
    With tap hole Ø 35mm on right side.
    Supplied with 1 ¼” waste for washbasin and 1½” for disposal sink. Without overflow.
    Hinged stainless steel bucket grid.
    Weight: 22kg.

  • TEMPOMATIC electronic tap for sinks with BIOCLIP removable spout
    Ref. 20804T215

    Wall-mounted electronic tap with BIOCLIP spout, for mounting on panels < 20mm.
    Independent IP65 electronic control unit (integrated 230/12V transformer).
    Flow rate limited to 5 lpm at 3 bar.
    Comes with 2 removable stainless steel spouts L. 188mm Ø 28mm.
    Base and spout with smooth interiors (reduces niches where bacteria can develop).
    Adjustable duty flush (pre-set to approx. 60 secs every 24h after last use) in order to prevent water stagnation in the network in the event of prolonged periods of non-use.
    Separate sensor for mounting on panels.
    Solenoid valve Ø 15mm for compression fittings with integrated filter.
    Shock-resistant infrared presence detection sensor.
    Chrome-plated Ø 60mm brass base.
    Anti-blocking security.
    Recommended installation height: 110-200mm above the basin surface.
    Two shut-off options:
    – standard mode: timed flow with automatic shut-off.
    – ON/OFF mode: user shuts off flow voluntarily after 30 minutes.
    Thermal shocks are possible.
    10-year warranty.

  • BOB TC washbasin
    Ref. 160130

    Wall-mounted washbasin with through-the-wallinstallation for service ducts.
    Basin internal diameter: 310mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    Vandal-resistant: shrouded basin.
    200mm threaded rod can be cut to size (other lengths are available on request).
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standardEN 14688.
    Weight: 5.5kg.

  • Wall-mounted wash trough.

    1800mm wide (see spec drawing)
    3 posts.
    MINERALCAST: composite material consisting of natural mineralsand polyester resin.
    Ideal for use in public and commercial places.
    Uniform, non-porous surface is easy to clean.
    One-piece cast washbasin, seam-free, for easy maintenanceand better hygiene.
    Pleasant to the touch.
    With no tap hole.
    Supplied with 1½” waste. Without overflow.
    Supplied with fixing elements.
    White, RAL 9016.
    Weight: 90kg.
    MINERALCAST pedestals in anthracite also available, sold individually

  • FACIL wall-mounted washbasin
    Ref. 120800 /121800

    Wall-mounted washbasin, 360x390mm.
    Basin internal diameter: 320mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 4.1kg.

  • Wall-mounted eye wash station
    Ref. 9102

    Wall-mounted eye wash station with manual control includes:
    304 stainless steel basin Ø 250mm, green powder-coated finish.
    Two spray heads fitted with protective caps in shock-resistant green ABS; will eject automatically when activated.
    1/4-turn, nickel-plated brass valve opens and closes quickly.
    Water flow is activated by the hand control. The eye wash will continue to operate when the hand control is released. The water flow will stop when the hand control is pulled towards the user.
    Flow rate 20 lpm at 3 bar.
    Aerators with stainless steel double filters.
    Water supply M1/2″.
    Pipework made from galvanised steel, grey powder-coated finish.
    Hand control made from galvanised steel, green powder-coated finish.
    Wall-mounted on a brass plate (screws not included.)
    Supplied with identification sign for first aid equipment: “Eye Wash”.
    10-year warranty.

  • S21 S TC wall-hung WC pan
    Ref. 160310

    Wall-hung WC pan with through-the-wall installation for service ducts.
    Elegant and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.5mm
    One-piece pressed WC bowl, seam-free for easy maintenanceand better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.
    Concealed perimetral flushing rim.
    Horizontal water inlet: Ø 55mm
    Horizontal waste outlet: Ø 100mm
    Water saving: works with 4L or more of water.
    200mm threaded rod can be cut to size (other lengths are available on request).
    Shrouded WC pan.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 11kg.

  • Wall-hung S21 S WC pan
    Ref. 110310

    Wall-hung WC pan, 360 x 350 x 535mm.
    Compatible with all standard frame systems available on the market.
    Elegant and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.5mm.
    One-piece pressed WC bowl, seam-free for easy maintenanceand better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.Concealed perimetral flushing rim.
    Horizontal water inlet: Ø 55mm.
    Horizontal waste outlet: Ø 100mm.
    Water saving: works with 4L or more of water.
    Shrouded pan.
    Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with fixing plate and 6 theft prevention TORX security screws.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 11kg.
    10-year warranty.

  • FRAJU PMR washbasin
    Ref. 120440

    Wall-mounted washbasin, 620x505mm.
    Suitable model for people with reduced mobility.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
    Rounded edges prevent injury.
    Without tap hole.
    Supplied with 1¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 5kg.

  • TEMPOMATIC multi-urinals urinal valve
    Ref. 487620

    TEMPOMATIC electronic valve with infrared barrier for urinals:
    Rinsing for 1 – 8 urinals (standard or stall) or 2 siphon action urinals.
    For recessed installation.
    Electronic unit with 230/12V transformer.
    Hydraulic unit with solenoid valve, stopcock M3/4″ and filter.
    Hygienic duty flush every 12hr after last use, prevents vacuums in the siphon.
    Presence detection by infrared barrier.
    Recessed Infrared detector Ø 50mm and reflector Ø 85mm.
    Automatic pre-rinse possible after the arrival of the first user.
    Automatic rinse every 30 or 60 sec.
    Time flow pre-set at 3 sec., can be adjusted from 2 to 14 sec.
    Flow rate 0.3 l/sec. at 3 bar pressure, can be adjusted.
    Maximum detection range recommended: 6 meters.
    Anti-blocking safety: automatic shut-off after 20 uninterrupted cycles.
    10-year warranty.

  • MINERALCAST wash trough

    1400mm wide (see Spec Drawing)
    Ref. 453140

    Wall-mounted wash trough, 3 services.
    MINERALCAST: composite material consisting of natural minerals and polyester resin.
    Ideal for use in public and commercial places, especially schools.
    Uniform, non-porous surface is easy to clean.
    One-piece cast wash trough, seam-free, for easy maintenance and better hygiene.
    Warm to the touch.
    With incline to prevent water pooling.
    With central tap hole Ø 35mm.
    Supplied with three 1¼” wastes. Without overflow.
    Supplied with fixing elements.
    White, RAL 9016.
    Weight: 63kg.

  • TEMPOMATIC 4 electronic tap
    Ref. 443426

    Electronic basin tap for panels:
    Battery-operated with integrated 123 6V Lithium batteries.
    Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
    Scale-resistant flow straightener.
    Duty flush (~60 seconds every 24 hours after last use).
    Active, infrared presence detection, sensor at the end of the spout optimises detection.
    Chrome-plated metal body L. 125mm.
    Cap fixed in place by 2 concealed screws.
    Installation for panels from 1 – 24mm.
    Anti-blocking security.
    10-year warranty.

  • TRIPLO RP wall-mounted multiple washbasin
    Ref. 120750

    Wall-mounted triple washbasin, 1,800x500mm.
    With an upstand to protect the wall from splashing and improve hygiene.
    Basin internal diameter: 310mm.
    Bacteriostatic 304 stainless steel.
    Polished satin stainless steel.
    Stainless steel thickness: 1.5mm
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with brackets and fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 22kg.

  • 700 P floor-standing WC pan
    Ref. 110700

    Floor-standing WC pan, 360 x 480 x 700mm.
    700mm elongated pan for better comfort for people with reduced mobility.
    Elegant and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.5mm.
    One-piece pressed WC bowl, seam-free for easy maintenanceand better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.
    Concealed perimetral flushing rim.
    Horizontal water inlet: Ø 55mm.
    Horizontal waste outlet: Ø 100mm. Supplied with PVC pipe.
    Water saving: works with 4L or more of water.
    Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
    Quick and easy to install: 2 access panels with theft prevention TORX security screws.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 15kg.
    10-year warranty.

  • MONOBLOCO S21 WC pan with cistern
    Ref. 110390

    Floor-standing WC pan with dual flush cistern 3L/6L, 370 x 815 x 620mm.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.5mm.
    One-piece pressed WC bowl, seam-free for better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.
    Concealed perimetral flushing rim. Water supply can be recessed from below or exposed from the side (right/left).
    Recessed horizontal or vertical waste outlet. Supplied with PVC pipe.
    Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
    Quick to install: 2 access panels with theft prevention TORX security screws.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 21kg.
    10-year warranty.

  • Wall-mounted TRAPEZ washbasin
    Ref. 120270
    Ref. 121270

    Wall-mounted washbasin, 600x505mm.
    Shallow washbasin suitable for people with reduced mobility.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 5.5kg.

  • S21 P TC floor-standing WC pan
    Ref. 160550

    Floor-standing WC pan with through-the-wall installation for service ducts.
    Elegant and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.5mm
    One-piece, pressed WC bowl, seam-free for easy maintenanceand better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.
    Concealed perimetral flushing rim.
    Horizontal water inlet: Ø 55mm
    Horizontal waste outlet: Ø 100mm
    Water saving: works with 4L or more of water.
    200mm threaded rod can be cut to size (other lengths available on request).
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 13.5kg.

  • S21 P floor-standing WC pan
    Ref. 110300

    Floor-standing WC pan, 360 x 400 x 580mm.
    Elegant and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.5mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.Concealed perimetral flushing rim.
    Horizontal water inlet: Ø 55mm.
    Horizontal waste outlet: Ø 100mm. Supplied with PVC pipe.
    Water saving: works with 4L or more of water.
    Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
    Quick and easy to install: 2 access panels with theft prevention TORXsecurity screws.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 14kg.
    10-year warranty.

  • TEMPOMATIC Electronic tap
    Ref. 44115715

    Cross wall electronic basin tap:
    Independent IP65 electronic control unit.
    230/12V mains supply with transformer.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Adjustable duty flush (pre-set flush ~60 sec. every 24h after last use).
    Shockproof infrared presence detection sensor for wall ≤ 165mm.
    Anti-blocking safety.
    Solenoid valve with filter and Ø 15mm conical inlet.
    Chrome-plated fixed spout L. 170mm for wall ≤ 165mm with anti-rotating pin.
    Threaded rods can be cut to size.
    10-year warranty.

    TEMPOMATIC Electronic tap
    Ref. 44115715

    Cross wall electronic basin tap:
    Independent IP65 electronic control unit.
    230/12V mains supply with transformer.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Adjustable duty flush (pre-set flush ~60 sec. every 24h after last use).
    Shockproof infrared presence detection sensor for wall ≤ 165mm.
    Anti-blocking safety.
    Solenoid valve with filter and Ø 15mm conical inlet.
    Chrome-plated fixed spout L. 170mm for wall ≤ 165mm with anti-rotating pin.
    Threaded rods can be cut to size.
    10-year warranty.

  • Wall-mounted BOB washbasin
    Ref. 120130
    Ref. 121130

    Wall-mounted washbasin.
    Basin internal diameter: 310mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    Vandal-resistant: shrouded basin, concealed trap.
    Quick and easy to install from the front thanksto a stainless steel mounting frame.
    Supplied with 1 ¼” waste and trap.
    With tap hole Ø 35mm on right side.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 5.5kg.

  • SECURITHERM shower panel
    Ref. H963915

    SECURITHERM anodised aluminium shower panel for wall-mounted exposed installation:
    SECURITHERM sequential thermostatic mixer (non time flow).
    Temperature control from cold water up to 39°C.
    Maximum temperature limiter set at 39°C, can be adjusted.
    Anti-scalding failsafe: automatic shut-off if cold or hot water supply fails.
    Thermal shocks are possible.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation at 6 lpm at 3 bar.
    Hygiene control lever L. 100mm.
    Top inlets with M1/2″ stopcocks.
    With copper tails.
    Concealed fixings and filters.
    10-year warranty.

  • SHA 700 squat WC pan
    Ref. 113620

    Floor-recessed squat WC pan, 700 x 345 x 700mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness 1.2mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    Bowl shape suitable for male and female use.
    Non-slip foot area.
    Vertical waste outlet: Ø 100mm.
    Flushing system with one 304 stainless steel spreader.
    Supplied with stainless steel trap welded to squat WC pan.
    Weight: 8kg.
    10-year warranty.

  • Wall-hung WC pan, 360 x 350 x 700mm.
    Available with 700mm elongated pan for improved comfort for peoplewith reduced mobility (700 S).
    Compatible with all standard frame systems available on the market.Elegant and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.5mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.
    Concealed perimetral flushing rim.
    Horizontal water inlet: Ø 55mm.
    Horizontal waste outlet: Ø 100mm.
    Water saving: works with 4L or more of water.
    Shrouded WC pan.
    Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with fixing plate and 6 theft prevention TORX security screws.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 14.5kg.
    10-year warranty.

  • SHA XS squat WC pan
    Ref. 113720

    Floor-recessed squat WC pan, 500 x 325 x 600mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness 1.2mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    Bowl shape suitable for male and female use.
    Non-slip foot area.
    Vertical waste outlet: Ø 100mm.
    Flushing system with one 304 stainless steel spreader.
    Supplied with stainless steel trap welded to squat WC pan.
    Weight: 7kg.
    10-year warranty.

  • BCN P floor-standing stainless steel pan
    Ref. 110100

    Floor-standing WC pan, 360 x 400 x 580mm.
    Elegant and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.5mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.
    Concealed perimetral flushing rim.
    Horizontal water inlet: Ø 55mm.
    Horizontal or vertical waste outlet: Ø 100mm. Supplied with PVC pipe.
    Water saving: works with 4L or more of water.
    Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
    Quick and easy to install: 2 access panels with theft prevention TORX security screws.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 12kg.
    10-year warranty.

  • Floor-standing ILHA JR drinking fountain
    Ref. 180110

    Floor-standing drinking fountain.
    Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.5mm.
    Height: 800mm for children.
    Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8″.
    Flat perforated waste, without screws:
    easy to clean and vandal-resistant.
    Recessed vertical water outlet. Waste outlet 1¼”.
    Supplied with fixing elements.
    Weight: 9kg.

  • KOMPACT washbasin and wall-hung WC combination
    Ref. 160500

    Combination unit: washbasin and WC pan suspended centrallywith recessed toilet roll holder.
    Wall-mounted installation with 3 access panels, 2 on the sidesand 1 on the top with theft prevention TORX security screws.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel unit thickness: 2mm.
    Rounded corners and edges for improved safety.
    Smooth surface for easy cleaning.
    Suitable for prisons, police stations, etc.
    WC pan is completely welded to washbasin, no screws:
    makes cleaning easier and prevents concealment of objects.
    Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2″.
    WC equipped with time flow flush valve, 7 second time flow, M3/4″.
    Water inlet: washbasin M1/2″, WC M3/4″.
    Recessed horizontal water outlet: Ø 100mm
    Supplied with washbasin siphon.
    Easy installation: only one water outlet for both washbasin and WC,water inlet and outlet already connected.
    Weight: 36kg

  • KOMPACT washbasin and floor-standing WC combination
    Ref. 160800

    Combination unit: washbasin and floor-standing central WC panwith recessed toilet roll holder.
    Wall-mounted installation with 3 access panels, 2 on the sidesand 1 on the top with theft prevention TORX security screws.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel unit thickness: 2mm.
    Rounded corners and edges for improved safety.
    Smooth surface for easy cleaning.
    Suitable for prisons, police stations, etc.
    WC pan is completely welded to washbasin, no screws:
    makes cleaning easier and prevents concealment of objects.
    WC pan central to the unit.
    Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2″.
    WC equipped with time flow flush valve, 7 second time flow, M3/4″.
    Water inlet: washbasin M1/2″, WC M3/4″.
    Recessed horizontal water outlet: Ø 100mm.
    Supplied with washbasin siphon.
    Easy to install: only one water outlet for both washbasin and WC,water inlet and outlet already connected.
    Weight: 36kg.

Go to Top