Educational, Healthcare and Commercial Sanitaryware

Need Help? Call us : 01924 457600

  • Recessed waterproof housing for TEMPOMATIC 4 urinal 430PBOX

    Recessed waterproof housing for TEMPOMATIC 4 urinal 430PBOX

    £122.38 ex VAT

    Recessed waterproof housing for TEMPOMATIC 4 urinal

    Ref. 430PBOX

    Recessed waterproof housing for electronic urinal valves, kit 1/2:
    Compatible with 123 Lithium 6V battery supply.
    Collar with waterproof seal.
    Hydraulic connection to the outside and maintenance from the front.
    Adjusts to all types of installation (rails, solid walls, panels).
    Compatible with wall finishes 10 – 120mm (while maintaining the minimum recessing depth of 83mm).
    Suitable for standard or “pipe in pipe” supply.
    Valve configured for secure system flush without sensitive elements, and connection accessories.
    Connection with Ø 35mm connection washer (for standard urinals) or ½” brass connection (for urinals supplied by flexible).
    For use with neck tube 752430 or 757430.
    30-year warranty.
    Order with control plate references 430006, 430016, 430026, or 430036,
  • Delabie Control Plate 430006

    Delabie Control plate for TEMPOMATIC 4 for urinals 430006

    £352.80 ex VAT

    Recessed Control plate for TEMPOMATIC 4 for urinals

    Ref. 430006

    TEMPOMATIC 4 electronic valve F½”, kit 2/2.
    Battery-operated with CR 123 Lithium 6V batteries.
    Solenoid valve enables opening and closing of water.
    Satin finish stainless steel wall plate 145 x 145mm with integrated electronics.
    Shock-resistant infrared presence detection sensor.
    Detection delay is 10 seconds.
    3 programmes (rinsing volume can be adjusted according to urinal type).
    High frequency mode (exclusive to DELABIE):
    – Short rinse after each user.
    – Additional rinse after the period of increased frequency of use.
    Hygienic duty flush every 24 hours (can be adjusted to 12 hours or OFF) after last use: prevents vaccums.
    Flow rate pre-set at 0.15 L/sec at 3 bar, can be adjusted.
    TEMPOMATIC 4 F½” valve compatible with sea water, rain water and grey water.
    Installation in waterproof housing with waterproof collar, transformer, filter and stopcock.
    Suitable for people with reduced mobility.
    10-year warranty.Order with frame system references 543006 for urinals Ø 35mm, 543006D for urinals with flexible ½” or with recessed housing 430PBOX.

  • Pendle CGL Cubicles with Stone Grey Doors with Plain Grey Pilasters

    Pendle CGL Stone grey toilet cubicle door pack with plain grey pilasters BOX A

    £365.00 ex VAT

    Pendle CGL Cubicle Door Pack (Box A)

    Pendle Stone Grey toilet cubicle door pack with Plain Grey pilasters

    From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments.

    The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

    The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

    Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

    This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

     

    Box A includes:

    • Door (1800 x 950mm)
    • End Pilasters (1800 x 150mm)
    • Lock & Latch with Outward Opening Adaptor
    • Channels, Head Rail and fittings

    Stone Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack

  • Pendle CGL Door Pack A Plain Grey

    Pendle CGL plain grey toilet cubicle door pack with plain grey pilasters BOX A

    £365.00 ex VAT

    Pendle CGL Cubicle Door Pack (Box A)

    Pendle plain grey toilet cubicle door pack with plain grey pilasters

    This light grey toilet cubicle door from the Pendle range is framed by light grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments. The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

    The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

    Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

    This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

     

    Box A includes:

    • Door (1800 x 950mm)
    • End Pilasters (1800 x 150mm)
    • Lock & Latch with Outward Opening Adaptor
    • Hinge Channel, Head Rail and fittings

    Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack

  • SIAMP Horizon toilet seat

    SIAMP Horizon Toilet Seat

    £23.00 ex VAT

    SIAMP Horizon commercial toilet seat.

    MDF toilet seat, 1-year guarantee, white, 2.7 kg. Dimensions L425mm and l370 mm, opening angle 98°. Fits all standard WC having fixing centers dimensions from 110 to 200 mm, metallic and adjustable hinges and screws.

  •

    SIAMP Intra Concealed Cistern Bottom Inlet

    £61.00 ex VAT

    Concealed cistern for floor mounted, back to wall WC. WRAS and NF approved components, 10-year guarantee. Cable flushing, bright chrome dual flush top or front flushing. 6 litres insulated cistern equipped with a dual flush outlet valve and a quiet fill inlet valve. Water inlet connection on the bottom of the cistern with 1/2″ plastic tail. Dimensions height 340 mm, width 460 mm and depth 127 mm.
    Complete delivery with fixing and connection accessories.

  •

    SIAMP Compact 99T BP Bottom Inlet 1/2 Plastic Tail Inlet Valve

    £13.00 ex VAT

    Bottom entry inlet valve  with 1/2″ brass connection. WRAS certified 10-year-guarantee.
    Features: adjustable height, low pressure, quiet, hydraulic closure, adjustable water level and anti-back flow. Length 270mm, width 112mm, depth 50mm.

  •

    SIAMP Segment Flush plate

    From £66.00 ex VAT

    SEGMENT flush plate

    Segmented by delicate chrome inserts, for use with SIAMP Wall frames (see below for compatibility)

    Available in 4 colour options

  • Delabie Stainless Steel Toilet Sign Male

    Delabie Stainless Steel Toilet Sign Male

    £25.36 ex VAT

    Stainless steel toilet signs
    Ref. 510152S

    Stainless steel self-adhesive toilet sign.
    Polished satin 304 stainless steel.
    Stainless steel thickness 1.2mm.
    “Male” sign.
    Dimensions: 125 x 125mm.
    10-year warranty.

  • Delabie Adjustable Height Floor Trap 150 x 150mm

    Delabie Adjustable Height Floor Trap 150 x 150mm

    £83.00 ex VAT

    Adjustable height floor trap
    Ref. 683001UK

    Floor trap for hard floors (tiles or concrete) with adjustable height:
    Flow rate 36 lpm (standard).
    Water level 50mm.
    Bright polished stainless steel plate and grid 150x150mm.
    Ø 43mm horizontal outlet integrated into the height of the floor trap (saves height and space in all directions).
    Integrated waterproof collar to seal waterproof membrane.
    Withstands high temperatures: 60°C continuous, 85°C peak.
    Plunger with handle: easy to grip and easy cleaning.
    Smooth PVC body (prevents build-up of impurities).
    Classified non-flammable (American certification UL94).
    110mm high, adjusts up to 70mm with extension.
    Grill fixed with two stainless steel screws.
    10-year warranty.

  • Delabie Wall-Mounted Liquid Soap Dispenser, 1 litre Satin

    Delabie Wall-Mounted Liquid Soap Dispenser, 1 litre Satin

    £98.00 ex VAT

    Wall-mounted liquid soap dispenser, 1 litre
    Ref. 510582

    Wall-mounted liquid soap dispenser with soft-touch operation.
    Vandal-resistant model with lock and standard DELABIE key.
    One-piece hinged cover for easy maintenance and improved hygiene.
    Push-button with soft-touch operation.
    Anti-blocking: single dose per press, even if the button is pressed for prolonged periods.
    Waste preventing, non-drip (waterproof) pump dispenser.
    Tank with large opening: eases transfer of soap from large containers.
    Tank prevents long-term stagnation of soap.
    Window allows soap level to be checked.
    304 stainless steel, polished satin finish.
    Stainless steel thickness: 1mm.
    Capacity: 1 litre.
    Dimensions: 90 x 105 x 252mm.
    For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
    Compatible with hydroalcoholic gel.
    10-year warranty.

  • Delabie Wall Mounted Waste Bin 25 litres Polished Satin

    Delabie Wall Mounted Waste Bin 25 litres Polished Satin

    £119.00 ex VAT

    Wall-mounted 304 stainless steel bin, 25 litres
    Ref. 510461S

    Wall-mounted, rectangular bin for paper towels and waste paper.
    Robust model.
    Bacteriostatic 304 stainless steel.
    Capacity 25 litres.
    Polished satin 304 stainless steel.
    Stainless steel thickness: 1mm.
    Dimensions: 155 x 355 x 460mm.
    10-year warranty.

  • Delabie Liquid Soap Dispenser, 0.5-litre

    Delabie Liquid Soap Dispenser, 0.5-litre

    £84.00 ex VAT

    Liquid soap dispenser, 0.5-litre
    Ref. 729508

    Deck-mounted liquid soap dispenser with straight spout.
    Model for deck-mounting on washbasins.
    Vandal-resistant model.
    Chrome-plated body and push-button.
    Non-drip system (waterproof).
    Mechanism can be locked via a grub screw.
    Top fill (by unscrewing thepush-button) or from the lower part (by unscrewing the bottle).
    Supplied with 0.5L bottle.
    10-year warranty.

  • Delabie Divider For Wall-Hung Trough Urinal

    Delabie Divider For Wall-Hung Trough Urinal

    £138.00 ex VAT

    Divider for wall-hung trough urinal
    Ref. 100900

    Divider for wall-hung trough urinals.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Install directly onto the urinal in the desired position.
    Only suitable for the new design wall-hung trough urinals ref.s 130100, 130110 and 130120.

  •

    Delabie DELTA Wall-Hung Urinal Recessed Water Inlet

    £469.67 ex VAT

    DELTA wall-hung urinal
    Ref. 134770

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rear (recessed) water inlet.
    Recessed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 7.5kg.

  •

    Delabie FINO Wall-Hung Urinal Exposed Water Inlet

    £352.00 ex VAT

    FINO wall-hung urinal
    Ref. 135110

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed horizontal or exposed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with a 1½” P trap. Supplied with fixing elements.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 3.5kg.

  •

    Delabie SECURITHERM Thermostatic Basin Mixer

    £353.00 ex VAT

    SECURITHERM thermostatic basin mixer
    Ref. H9600610

    Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
    Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
    Securitouch thermal insulation prevents burns.
    No non-return valve on the inlets.
    Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
    Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
    Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
    Spout and body with smooth interiors and low water volume.
    Flow rate regulated at 7 lpm.
    No manual contact thanks to Hygiene control lever L. 146mm.
    Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
    Reinforced fixing via 2 stainless steel rods.
    10-year warranty.

  •

    Delabie CANAL Wall-Mounted Wash Trough 1800mm

    £510.00 ex VAT

    CANAL wall-mounted wash trough
    Ref. 120280

    Wall-mounted wash trough for 3-4 posts – L. 1,800mm
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1mm for the bowl, 1.5mm for surround and fixing brackets.
    Easy to install: no joint concealers to install, light wash trough.
    Drainage on the right.
    With no tap hole.
    Supplied with 1 ½” waste.
    Without overflow.
    Supplied with brackets and fixing elements.
    CE marked. Complies with European standard EN 14296.
    Weight: 15.5kg.
    Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800005).

  •

    Aqua Ice

    From £80.00 ex VAT

    Mineral Collection

    From subtle shimmers to flickering quartz; this versatile collection complements both modern and traditional spaces.These stylish designs blend confidence with refinement to ensure that you have the right decor for your feature. All decors from the Mineral Collection are manufactured from a moisture resistant MDF core and finished with a high pressure laminate (HPL).

  • Close coupled Doc M Pack with steel grab rails Dark Blue

    Close coupled Doc M toilet pack, with Steel Grab Rails, exposed fittings

    £436.00 ex VAT

    Product Description

    This Doc M pack is designed to provide a toilet facility with additional support for the user. The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.

    The pack contents include:

    5 x 600mm Steel Grab Rails
    1 x 800mm Lift & lock steel hinged Rail
    1 x Close coupled WC pan & cistern assembly
    1 x Ring only toilet seat with stainless hinge
    1 x Two tap hole basin & fittings
    1 x Basin mixer tap
    1 x Spatula cistern lever
    1 x TMV3 in-line thermostatic valve

    Finish options available in White, Grey and Dark Blue

     

    Features & Benefits

    • Inlet valve and syphon Reg 4 Certified (WRAS, NSF, Kiwa, etc.)
    • Universal – suitable for left or right handed transfer
    • Simple one box solution
    • Hygienic rimless pan with robust dedicated seat

FREQUENTLY ASKED QUESTIONS

We don’t offer a fit out service ourselves, but our sister company Cubicle Centre has a nationwide network of fully approved installers. Contact them here to find out more:

A standard toilet cubicle is 750mm (wide) x 1500mm (deep).
Further diagrams and information on different types of toilet cubicles can be found on our Toilet Cubicle Size Page.

The Pendle and Pendle Junior box packed cubicle systems are usually dispatched within 3-5 working days of order. The complete Pendle range can be ordered online at Plumbware.co.uk

Our Pendle Range of toilet cubicles are  made by our sister company Cubicle Centre  and are designed as an off the shelf solution for quick delivery. They offer a more bespoke range of solutions on  amade to measure, job-to-job basis.
Email (sales@washroomcubicles.co.uk) your washroom requirements along with a drawing or sketch and they’ll do the rest.
Alternatively, visit www.washroomcubicles.co.uk/quote to fill in an online form.
The Sales team are on hand to answer any questions you may have on 01924 457600.

Lead times can vary from 5 to 7 working days depending on your specific requirements.
PLEASE NOTE: Lead times may increase during busier periods of the year (i.e. school holidays)

We don’t offer Account facilities here at Plumbware.co.uk, but should you have an ongoing requirement for regular orders of bulk items, you may apply to open an account with our sister company, Cubicle Centre. Account application forms are available here.

Different sectors have different washroom regulations.
For example, a school has different toilet layout regulations to an office. To save time and effort when planning your project we created PDF guides for different sectors. Schools, offices, leisure centres, stadiums and holiday parks are all covered.

Visit our Guide Page at washroomcubicles.co.uk

There are a number  of resources to help with the planning of a washroom project. 2D CAD drawings, 3D BIM files, specification sheets and a customised specification tool are available on our Architect Resources page.

YOUR ONE STOP SHOP FOR COMMERCIAL WASHROOM SOLUTIONS

COMPANY INFORMATION

01924 457600

Mon-Thursday 8.30am – 5pm
Friday: 8.30am – 3pm

OUR POLICIES

SECURE PAYMENTS BY

Registered in England: 06851971 | VAT no. 380618882 | © Plumbware.co.uk Ltd 2009 - 2026

Go to Top